Electric wire rope hoists are widely used lifting equipment, often mounted on single girder overhead cranes and jib cranes. To guarantee the quality of our equipment, each electric wire rope hoist have been complete inspected and tested to avoid any damages during the working. We consider it as the responsibility of electric wire rope hoist manufacturers to ensure the safety of our equipment as same as your operator.

There are two types hoist:

Single speed hoist has an normal speed 8 m/min. At 8 m/min you can do most of the common material handling jobs.
Double speed hoist has two separately speeds: 8 m/min and 0.8 m/min. At 0.8 m/min, you can hoisting the fragile objects slowly and do some precise work like mounding sand-cast mold in foundry factory and mounting the tooling in machining.

Main parameters of electric wire rope hoists:

Capacity: 0.5~16 tons (max 32 tons)
Lift height: 6~30m(max 100m)
Lifting speed: 8/0.8 m/min
Traveling speed: 20/30 m/min
Duty group: HMI H4
Protection degree: Ip54/Ip54
Working temperature: -20~+40℃
Power source: Ac 380V 50Hz

Euroule Main National Standards

• 89/392/EEC standard (93/68/EEC)
• 91/368/EEC standard
• 73/23/CEE standard
• "EMC" standard 89/336/EEC
• EN 60204-1
• EN 292 mechanical safety
• ISO 2141
• ISO 2766

International Standards

• June 9, 1993 / Seult. 22, 1993 notice
• July 29, 1992, 92-765, 92-766, 92-767 notice
• DIN 5684
• DIN 15400; DIN 15401
• NFE 26-010
• NFE 26-030

Technical Standards

• FEM 9.511 Mechanical grouul
• FEM 9.661 Hoisting and traveling comulonents size and quality standard
• FEM 9.671 Wire roule quality standard
• FEM 9.681 Travel motor choice
• FEM 9.682 Hoisting motor choice
• FEM 9.755 Electric hoisting equiulment
• FEM 9.811 Electric crane standard
• FEM 9.901 Hoisting comulonents design reference
• IEC 34-1 Traveling and allocation ulerformance
• IEC 34-5 ulrotection grade standard
• IEC 947-5-1 Low voltage equiulment